In short: how far you can see depends on how much light is scattered by tiny particles in the air – water droplets, ice, dust, smoke and salt. Clear, fresh air behind a cold front gives the best visibility; still, stagnant air under high pressure (or a plume of Saharan dust or wildfire smoke) gives the worst.
Visibility in the UK has generally improved since the 1950s as air pollution has fallen, and today it is mostly measured automatically by sensors rather than by eye.
What controls how far we can see?
Visibility – how far we can see – is determined by the amount, size and type of aerosols in the air. These tiny particles are either natural or man-made, and come in the form of liquid water, ice crystals or solid particles (‘particulates’) from natural and human sources. Most of this article deals with horizontal visibility, but vertical visibility matters a great deal too, especially to pilots and astronomers.
How far away an object can be seen (and recognised for what it is) depends on the viewer – their position and how keen their eyesight is – and on how much is in the way. For an object to be clearly visible, enough light from it must reach the eye for the brain to recognise it. On its way from object to eye that light is subject to absorption and scattering, and scattering is by far the more important of the two.
Why does haze look blue-grey, but fog look white?
The colour of a murky sky is a clue to what is causing it. The key is the size of the particles compared with the wavelength of light.
- Very small particles – much smaller than a light wave, such as those in haze, smoke and polluted air – scatter blue light much more strongly than red. Distant hills look blue-grey, and smoke haze can look brownish or yellowish. This is the same effect that makes a clear sky blue.
- Larger particles – water droplets in fog, mist and cloud – are bigger than a light wave and scatter all colours roughly equally. The result looks white or grey.
So a bluish or brownish haze usually means dry particles such as pollution, dust or smoke, while a white or grey murk usually means water droplets.

Small particles scatter blue light most; larger droplets scatter all colours about equally.
How do water droplets and ice reduce visibility?
Fog, mist, cloud and precipitation are the obvious reasons you may not be able to see far. All are made of water droplets or ice particles of varying sizes, which scatter the light coming from an object. How much depends on the number, type and size of the particles: the more scattering, the poorer the visibility.*
At sea, spray whipped up by very strong winds fills the air with tiny water droplets, which reduces visibility in much the same way as thick mist or fog.
Moisture also matters before fog forms. Many particles, particularly salt and some pollutants, absorb water and swell as the air gets more humid. That makes them scatter more light, so haze often thickens noticeably as the humidity rises, long before the air is saturated.
* Although precipitation reduces visibility, even if only slightly, it can sometimes improve visibility overall, because rain ‘washes out’ impurities from the air.
How do dust, smoke and salt reduce visibility?
Suspended solids, or “particulates“, can greatly reduce visibility when conditions are right and there are enough of them.
Air contains a variable amount of impurities, such as dust, soot and salt. “Dust” covers the whole range of pollutants from industrial processes and exhaust from transport, as well as fine soil particles lifted from very dry, exposed fields by a persistently strong wind.
The main natural source of dust is arid regions such as deserts and steppes. Coarse material lifted by strong, turbulent winds never travels far from its source, but the finest dust and soil particles spread easily through the lower atmosphere and can be carried a very long way.
Industrial areas, forest and heath fires, and volcanoes are the main sources of soot and other particulates. Smoke can cause a dramatic, though usually temporary, drop in visibility.
Burning at very high temperatures is usually efficient and leaves little unburned residue. However, many fuels (including most used in transport) are burnt at relatively low temperatures, so carbon residues enter the lower atmosphere and, in the right conditions, can be carried long distances.
The air also contains a great deal of salt. Winds whip spray up from the oceans, and when the spray evaporates the salt is left floating in the air as tiny particles. Of all the particles in the atmosphere, sea salt makes up by far the greatest quantity – hardly surprising given how much of the Earth’s surface is covered by sea.
All these particles are far too small to see individually with the naked eye, but their effect on visibility and on the colour of distant objects is easy to see, because they scatter the light travelling from those objects to us.
Visibility and air quality: PM2.5 and PM10
Many people now see particle levels in weather and air-quality apps as PM10 and PM2.5 – the concentration of particles smaller than 10 and 2.5 micrometres across (a human hair is roughly 50–70 micrometres wide).
These are largely the same particles that cause haze. The finest ones, around the size of a wavelength of light, are the most effective at scattering it, so poor visibility on a dry, still day is often a visible sign of high PM2.5. The link is not exact, because humidity makes particles swell and a fixed amount of pollution can therefore look much hazier on a damp day. Even so, if distant landmarks look washed out and there is no mist or fog, it is worth checking the local air-quality forecast.
When is visibility at its best?
The cleanest air, at least in mid-latitude maritime climates such as the UK’s, usually comes with air masses from polar regions. Their absolute and relative humidity is low, and a reasonably brisk breeze mixes the lowest layers of air, reducing or removing anything that might cut visibility near the ground. Showers may cause temporary (and often marked) drops in visibility, but they usually pass quickly and the excellent conditions return. The flow also tends to be unstable (cold air moving over a relatively warm surface), which further improves vertical mixing.
This is why the clearest days often come just behind a cold front, when distant hills look sharp and close.
When is visibility at its worst?
Air moving towards the pole (from the south in the northern hemisphere) tends to be stable, so vertical mixing is limited. In the extreme case – anticyclonic temperature inversions in winter – there is no vertical mixing at all over a large area. Moderate to poor visibility from man-made pollution is often a feature of ‘blocked’ anticyclonic spells. The airflow brings pollutants from nearby or distant sources, and the temperature inversion stops low-level air mixing upwards, trapping dust and particulates within the lowest few tens of metres of the atmosphere. In extreme cases, pollution alone can reduce visibility to fog limits (under 1,000 m) even though the relative humidity is below 90%.
In north-west Europe, air arriving from the south or south-east often carries a heavy dust load from the arid regions of the Mediterranean and North Africa. This is especially so when those regions have intense convective storms – for example over the Sahara in the summer half of the year. These storms lift huge amounts of very fine sand into the air, which can be carried many hundreds or even thousands of kilometres and markedly reduce visibility far from the source.
Recent examples
- Saharan dust, October 2017: the circulation of ex-hurricane Ophelia drew air laden with Saharan dust (along with smoke from wildfires in Iberia) north over the UK, turning skies orange and the sun red across much of England and Wales.
- Saharan dust, March 2025: the Copernicus Atmosphere Monitoring Service tracked a large dust plume that moved from the Iberian Peninsula into northern Europe, including the UK.
- Canadian wildfire smoke, 2023 and 2026: smoke from Canadian wildfires crossed the Atlantic on the jet stream and reached Europe, most recently in July 2026, when it gave the UK unusually vivid sunrises and sunsets. Because the smoke was high in the atmosphere, its effect on air quality at ground level was small.
Dust that falls out in rain leaves the familiar film of orange-brown grit on cars and windows, sometimes called ‘blood rain’.
Is visibility better than it used to be?
Yes, in general. After the Great Smog of December 1952, the Clean Air Act 1956 began a long decline in smoke and soot over UK towns and cities, and later controls on industry, power stations and vehicles continued the trend.
A study of 60 years of visibility records from eight UK stations – urban, rural and coastal – found that visibility had increased at most sites since the 1950s, and linked the improvement to reduced air pollution, especially in urban areas. The thick, smoky winter fogs that older observers remember are now rare.
How is visibility described?
Forecasts and reports use standard terms. These are the ones you are most likely to hear:
| Term | Visibility | Where it is used |
|---|---|---|
| Good | More than 5 nautical miles (about 9 km) | Shipping forecast and marine forecasts |
| Moderate | 2 to 5 nautical miles (about 3.7–9 km) | Shipping forecast and marine forecasts |
| Poor | 1,000 metres to 2 nautical miles | Shipping forecast and marine forecasts |
| Very poor | Less than 1,000 metres | Shipping forecast and marine forecasts |
| Fog | Less than 1,000 metres, caused by water droplets | Weather observations and reports |
| Mist | 1,000 metres or more, caused by water droplets | Air is moist, close to saturation |
| Haze | Reduced by dry particles (dust, smoke, salt) | Air is relatively dry |
In aviation reports (METARs), visibility is given as four figures in metres: 0400 means 400 m, 8000 means 8 km, 9999 means 10 km or more, and 0000 means less than 50 m. The cause is shown by a code such as FG (fog), BR (mist), HZ (haze), FU (smoke) or DU (dust), so “3000 BR” means 3 km visibility in mist. CAVOK (“cloud and visibility OK”) is used only when visibility is 10 km or more, there is no significant cloud or weather, and no cumulonimbus or towering cumulus.
How is visibility measured today?
Traditionally, observers judged visibility by eye, using landmarks at known distances from the observing point and noting the furthest one they could see clearly. As long as visibility did not vary much in different directions (for example because of a nearby patch of mist or fog), the distance of that landmark was reported as the visibility. Aviation reports now use ‘prevailing’ visibility – the value that covers most of the horizon – rather than the minimum.
Today, most visibility readings come from automatic sensors:
- Forward-scatter sensors are now standard at most automatic weather stations, including those run by the Met Office. A bright xenon strobe shines into a small volume of air next to the sensor, and a detector measures how much light is scattered. From this the sensor calculates the meteorological optical range – the distance over which a beam of light fades to 5% of its original strength – which corresponds closely to what a human observer would report. They work from a few tens of metres to a few tens of kilometres. At staffed sites such as airfields, the sensor reading supports the observer’s own estimate.
- Transmissometers measure how much a light beam fades over a fixed baseline. They are still used at airports, particularly to calculate runway visual range (RVR) in fog.
- Present-weather sensors combine scatter measurements with detection of rain, drizzle and snow, so they can also tell what is reducing the visibility.
Sensors give a far more consistent record than a series of different human observers, provided they are properly calibrated and maintained. Their weakness is that they sample only a small volume of air at one spot, so they cannot see a fog bank across the valley or a shower passing nearby.
From above, satellites now measure the haziness of the whole atmospheric column (its aerosol optical depth) and track dust and smoke plumes across continents. The Copernicus Atmosphere Monitoring Service (CAMS) combines these observations with computer models to forecast dust and smoke, and can issue aerosol alerts for European cities up to three days ahead.
Astronomy: transparency, ‘seeing’ and light pollution
For astronomers, good visibility means something different from a meteorologist’s or pilot’s horizontal view (except for objects close to the horizon). Two separate qualities matter:
- Transparency – how clear the sky is. As well as no cloud or fog, this needs low levels of haze, dust and smoke.
- ‘Seeing’ – how steady the air is. Deep-sky objects such as stars behave like point sources of light, so they need a steady atmosphere, free of the distortion caused by turbulence in strong upper winds such as the jet stream.
Surprisingly, these two can conflict. Just behind a quickly clearing cold front, cloud may be minimal and the stars may be shining brightly, yet distant star clusters can look blurred because of the polar jet stream behind the front. Atmospheric turbulence matters less for objects within the solar system.
Today, the biggest obstacle for many amateur astronomers is light pollution. Artificial light is scattered by the same aerosols discussed above, producing a glow over towns that hides fainter stars. Hazy or humid nights make it worse, because there are more particles to scatter the light; very clean polar air reduces it. Dark-sky parks and reserves around the UK offer the best chances of a truly dark sky.
Further reading
- How we measure visibility – Met Office
- Marine forecast glossary – Met Office
- 60 years of UK visibility measurements – Atmospheric Chemistry and Physics, 2017
- Saharan dust plumes tracked across the Atlantic and over Europe – Copernicus Atmosphere Monitoring Service
- Meteorological Aerodrome Report (METAR) – SKYbrary
Originally published on Weather FAQs (uk.sci.weather resources), January 2008. Updated October 2026.
